KROHNE OPTISWITCH 3000C Relay EN - Manual (Page 24)

9 Supplement
9.1 Technical data
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
- Process fitting - thread
plastic PBT (Polyester)
- Process seal - Thread Klingersil C-4400
- Tuning fork 316L
Materials, non-wetted parts
- Housing
plastic PBT (Polyester)
- Seal ring between housing and
housing cover
silicone
- Ground terminal 316L
Weight 1500 g (53 oz)
Max. lateral load 600 N (135 lbf) longitudinal to the fork side
Output variable
Output
relay output (DPDT), 2 floating spdts
Turn-on voltage
- min.
10 mV
- max. 253 V AC, 253 V DC
Switching current
- min.
10 µA
- max. 3 A AC, 1 A DC
Breaking capacity
- min.
50 mW
- max.
750 VA AC, 54 W DC
If inductive loads or stronger currents are
switched through, the gold plating on the relay
contact surface will be permanently damaged.
The contact is then no longer suitable for
switching low-level signal circuits.
Contact material (relay contacts) AgNi or AgSnO and Au plated
Modes (adjustable) min./max.
24 OPTISWITCH 3000 C - with relay output
Supplement
30059
-EN
-060830