KROHNE OPTISOUND 3030C 2wire EN - Manual (Page 12)

Fig. 6: Vessel with conical bottom
Preferably the transducer should be mounted flush to the
vessel top.
If the reflective properties of the medium are good, you can
mount OPTISOUND 3030 C on a socket piece. You will find
recommended values of the socket heights in the following
illustration. The socket end should be smooth and burr-free, if
possible also rounded. Carry out a false echo storage.
d
45°
h
max.
d
100 mm/4"
150 mm/6"
200 mm/8"
250 mm/10" 300 mm
400 mm
500 mm
600 mm
h
max.
Fig. 7: Deviating socket dimensions
Socket
12 OPTISOUND 3030 C - 4 … 20 mA/HART
Mounting
30511
-EN
-050914