KROHNE DK 32-DK 34-DK 37 Safety V2 EN - Manual (Page 4)

2
TERMS AND DEFINITIONS
4
DK32 - DK34 - DK37
www.krohne.com 06/2013 - 4000574703 MA DK32 34 37 SIL R03 en
Terms and definitions
Terms and definitions
2.1 Description of the considered profiles
DC
D
Diagnostic Coverage of dangerous failures
FIT Failure In Time (1x10 -9 failures per hour)
FMEDA Failure Modes, Effects and Diagnostic Analysis
HFT Hardware Fault Tolerance
Low demand mode Mode, where the frequency of demand for operation made on a safety-related
system is not greater than one per year and not greater than twice in the proof test
frequency.
PFD
AVG
Average Probability of Failure on Demand
SFF Safe Failure Fraction summarizes the fraction of failure, which lead to a safe state
and the fraction of failures which will be detected by diagnostic measures and lead
to a defined safety action.
SIF Safety Instrumented Function
SIL Safety Integrity Level
Type A component "Non-complex" subsystem (all failure modes are well defined); for details see
7.4.3.1.2 of IEC 61508-2.
Type B component "Complex" subsystem (all failure modes are well defined); for details see 7.4.3.1.2
of IEC 61508-2.
T[Proof] Proof Test Interval
Profile Profile according to
IEC 60654-1 Ambient temperature [°C] Temperature cycle
[°C / 365 days]
Average (external) Mean (inside box)
2 C3 25 30 25
4 D1 25 30 35
Profile 2 (low stress): Mechanical field products with minimal self heating, subject to daily
temperature swings.
Profile 4 (high stress): Unprotected mechanical field products with minimal self heating,
subject to daily temperature swings and rain or condensation.
MA_DK32_34_37_SIL_R03_en_574703_PRT.book Page 4 Wednesday, June 26, 2013 9:17 AM