KROHNE M8E Converter HART 0101 - Manual (Page 9)

Attachment B
M8E Menu Tree AMS
•
Flow
•
Flow, scaled by URV/LRV
•
Flow, scaled by USL/LSL
•
Positive Totalizer
•
Current Output
•
Flow, Percent Range
Process Variables
Status
Scan Device
-----------------------------------
Diagnostics and Test
Calibrate
-----------------------------------
Master reset
Reset configuration flag
Error reset
-----------------------------------
Totalizer
Set to default value
Change Writeprotect
Change Password
-----------------------------------
Audit Trail
Record Manual Event
Drawing Notes ...
Help ...
-----------------------------------
Clear Offline Configuration
Compare Configurations
Configuration Properties
Overview
•
Primary variable out of limits
•
Non-primary variable out of limits
•
Primary variable analog output saturated
•
Primary variable analog output fixed
•
Cold start
•
Configuration changed
•
Field device malfunction
•
no temperature compensation
•
no output linearization
•
totalizer error
•
FRAM error
•
ROM error
•
Reastart OF Device
•
no table is valid
•
new table bad, use old table
•
table under configuration
•
conflict between unit system and unit code
•
too few number of xy values
•
X-Value for first table index is not 0%
•
X-Value for last table index is not 100%
– refer to the next page.
Errors
Designations:
•
no zero calibration of analog output
•
no full scale calibration of analog output
•
B1 is inactive
•
B1 Flow >= Flowlimit
•
B1 Flow < Flowlimit
•
B1 Counter >= counter limit
•
B2 is inactive
•
B2 Flow >= Flowlimit
•
B2 Flow < Flowlimit
•
B2 Counter >= counter limit
Warnings