KROHNE IFC 100 Converter Quickstart EN - Manual (Page 27)

ELECTRICAL CONNECTIONS
3
27
IFC 100
www.krohne.com 07/2010 - 4000124104 - QS IFC 100 R04 en
3.9 Electrical connection of the outputs
3.9.1 Electrical connection of the outputs
• Open the housing cover
• Push the prepared cables through the cable entries and connect the necessary conductors.
• Connect the shield.
• Close the housing cover.
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!
Figure 3-14: Connection of outputs
1 Cable entry, remote version
2 Cable entry, compact version
3 Terminal S for shield
INFORMATION!
Ensure that the housing gasket is properly fitted, clean and undamaged.