KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 23)

22
6. Measuring Software
Start-up Operation
6. Measuring Software
Use the Measuring Software to collect particle, air velocity, temperature , humidity and differential pressure data
from the Airborne Particle Counter.
6.1. Operation Overview
* NOTE: The instrument must be placed in
“REMOTE MODE” when running this
program (Please refer to the instrument
manual for further directions).
(1) From the start menu, click :[(All) Programs]
-> [KANOMAX] - > [Measuring Software].
(2) The Initial Screen appears displaying the last
file that was displayed when the program was
last used.
(3) To configure LAN Settings,
go to: [Setting] -> [R LAN Setting…]
and configure the Host Name.
(Refer to 6.4.1.LAN Settings.)
(4) To start measuring, click [Measurement] from
the menu bar or click
(5) As shown on the right, go to [File] -> [Save] to save
the data from the current measurement.
(6) To end the program, go to [File] -> [Exit].