AOC L15X421 - Manual (Page 13)

11
Picture Setting
When the input source is in PC mode, you can select Brightness, Contrast,
Position, Video noise, Sharpness, Auto Adjust, Info, Colour Temp., Red,
Green, Blue and Reset to default; shown in the figure below:
1. Brightness and Contrast: The range can be adjusted from 0~100.
2. Position: There are two options, Horizontal and Vertical, which can be
adjusted from -50 to +50.
3. Video noise: There are two options, Phase and Clock, which can be
adjusted from -50 to +50.
4. Sharpness: Select from five options of Softest, Soft, Auto, Sharp and
Sharpest. You may adjust the above options according to your
preference.
5. Auto Adjust: Automatically adjust PC input to the optimal screen size.
6. Info: Prompt the current size for PC input definition (only the definition
that can be shown by this device).
7. Colour Temp.: There are four options of colour temperature provided for
users - 6500, 7300, 9300 and Personal. You can select the three colour
temperatures of 6500, 7300 and 9300, or manually adjust red, green or
blue in the personal setting (you can only adjust red, green and blue in
the personal setting).
8. Reset to default: It is used to reset the picture settings to the factory
default mode.