AT&T EP5632/EP5632-2 User Manual

Page 40

System setup

Ringer Volume
You can choose from six handset ringer melody
volume levels. The ringer can also be turned off so
the phone does not ring during incoming calls.

To adjust the handset ringer volume:

1. Press

MENU/

SELECT

in idle mode to enter the

main menu.

2. Press the

UP and DOWN Navkeys to select

Ringers, then press

MENU

/SELECT to enter the

Ringers menu.

3. Press the

UP and DOWN NavKeys to highlight:

•

Ringer for HOME - set the ringer volume
and melody for the

HOME line.

•

Ringer for CELL 1 - set the ringer volume
and melody for the first connected cellular
phone in the

Active Devices list (page

27).

•

Ringer for CELL 2 - set the ringer volume
and melody for the second connected
cellular phone in the

Active Devices list

(page 27).

Press

MENU

/SELECT.

Press

MENU

/SELECT again to adjust the volume

setting.

6. To increase and decrease the handset ringer

volume:

• Press the

UP and DOWN NavKeys, or

• Press the

LEFT and RIGHT NavKeys, or

• Press the

UP and DOWN volume controls on

the side of the handset

-OR-

To turn off the handset ringer:
• Press the

OFF softkey, or

• Press the

DOWN NavKey, LEFT NavKey, or

DOWN volume control on the side of handset
until Ringer Off is shown on the display.

7. Press the

SET softkey or

MENU

/SELECT to save

the setting.

Ringer for CELL 1

Ringer for CELL 2

Record New Ringer

Ringer for HOME

Ringers

Ringer Volume

SET

OFF

Ringer Volume

SET

OFF

Ringer Off

NOTE: Even if the

ringer volume is off, the
telephone base or handset
will ring at the lowest
volume setting during an
incoming intercom call.