HT instruments HT2234N - Manual (Page 4)

HT2234N
EN - 3
2. INSTRUMENT DESCRIPTION
The HT2234N meter performs the hereunder tests:
• RPM and RPS speed measures with and without contact
• m/min, ft/min and yd/min surface speed measures
• Events
counter
• MAX/MIN/AVE
functions
3. PREPARING TO USE
3.1. INITIAL
This instrument has been checked mechanically and electrically prior to shipment. Every
care has been taken to ensure that the instrument reaches you undamaged.
However, it is wise to carry out a rapid check in order to detect any possible damage which
might have been caused during transport. Should this be the case, immediately enter the
usual claims with courier.
Check the packaging contained according to packaging list reported in paragraph 7.3. In
case of discrepancies contact the dealer.
In the event of re-shipment of the equipment please follow the instructions reported in
chapter 8.
3.2. SUPPLY
VOLTAGE
The instrument is battery supplied. It uses four battery model 1.5V AA UM3 type included
in the packaging. When the batteries are low the symbol "
B
" is displayed. To replace
batteries follow the instructions indicated in chapter 6.2.
3.3. CALIBRATION
The instrument fulfils the technical characteristics listed in this manual. The performance of
the specifications are guaranteed for one year.
3.4. STORAGE
In order to guarantee the accuracy of the measurements, after a period of storage in
extreme environment condition, wait for the time necessary so that the apparatus returns
to normal measuring conditions (see environments specifications paragraph 7.2).