Detcon 1010A RACK - Manual

detcon inc.
Detcon Model 1010A RACK
Panel Mount Control Enclosure
Operators Instruction Manual
July 21, 1997, Document #2472, Revision 1.0
Detcon Model 1010A along with Model 10A digital control modules is designed to serve as a host assembly
for up to ten remote mount gas detection sensor assemblies. The control enclosure is rated NEMA 1 suitable
for installation in non-hazardous locations. The single channel modular design supports application
flexibility wherein multiple function gas detection systems can be configured in any combination up to ten
channels. All control modules are plug-in front panel accessible for easy maintenance and repair. The system
is powered by a removeable 24 VDC power supply assembly mounted inside the host assembly. The power
supply is rated at 57 watts. A power switch and 3 amp fuse are mounted on the front of the power supply
assembly. Auxilary 24 VDC terminals are also provided for battery backup.
Refer to drawing #499.08A for dimensions and mounting detail. Refer to drawing #1215A for field/control
terminals.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
HIGH
LOW
FAULT
ALARM
RESET
HOUSTON, TEXAS
MODEL 10A
H2S MONITOR
ppm
LOCK
detcon inc.
detcon inc.
MODEL 1010A RACK
POWER FUSE
HOUSTON, TEXAS
❏
1.0 INTRODUCTION
Detcon Model 1010A Rack consists of 3 major assemblies:
1. The NEMA 1 rack mount control enclosure.
2. The single channel digital control modules.
3. The remote mount gas sensor assemblies.
The NEMA 1 control enclosure is detailed in section 1.0 of the manual, the control modules in section 2.0,
and the applicable sensor assemblies in section 3.0.
❏
1.1 DESCRIPTION
Shipping Address: 3200 A-1 Research Forest Dr., The Woodlands, Texas 7381
Mailing Address: P.O. Box 8067, The Woodlands, Texas 77387-8067
phone 888-367-4286, 281-367-4100 • fax 281-292-2860 • www.detcon.com • [email protected]