Detcon TP-524D - Manual (Page 38)

Model TP-524D
TP-524D Instruction Manual Rev. 0.5 Page 34 of 36
8.2 Spare Parts, Sensor Accessories, Calibration Equipment
Part Number Spare Parts
925-0154D0-100 TP-524D Plug-in Transmitter Module
399-800000-000 Replacement H
2
S sensor
500-005065-007 Standard Connector PCB
960-202200-000 Condensation Prevention Packet (for J-Box replace annually)
960-240010-000 Desiccant Protection Packet for Cell
960-398800-000 H2S/MOS DRICAP w/desiccant (10 pack)
Sensor Accessories
897-850800-000 NEMA 7 Aluminum Enclosure less cover – 3 port
897-850400-000 NEMA 7 Aluminum Enclosure Cover (Blank)
897-850801-316 NEMA 7 316SS Enclosure less cover – 3 port
897-850401-316 NEMA 7 316SS Enclosure Cover (Blank)
600-610000-000 Sensor Splashguard with integral Cal-Port
943-002274-000 Harsh Location Dust guard
327-000000-000 Programming Magnet
600-003307-000 Dust Cap 7/8" Thread
960-202200-000 Condensation Prevention Packet (for J-Box replace annually)
960-240010-000 Desiccant Protection Packet for Cell
960-398800-000 H2S/MOS DRICAP w/desiccant (10 pack)
Calibration Accessories
985-241100-321 In-Line Humidifying Tube
943-000006-038 Threaded Calibration Adapter
943-020000-000 Span Gas Kit: Includes calibration adapter, In-Line Humidifying Tube,
200cc/min fixed flow regulator, and carrying case.
(Does Not include gas).
942-010112-010 Span Gas cylinder: 10ppm H
2
S in air (for 20ppm range)
Contains 58 liters of gas and is good for 80 calibrations
942-010112-025 Span Gas cylinder: 25ppm H
2
S in air (for 50 and 100ppm ranges).
Contains 58 liters of gas and is good for 80 calibrations
943-090005-502 200cc/min Fixed Flow Regulator for span gas bottle
Recommend Spare Parts for 2 Years
925-0154D0-100 TP-524D Plug-in Transmitter Module
399-800000-000 Replacement H
2
S sensor
500-005065-007 Standard Connector PCB
960-202200-000 Condensation prevention packet (for J-Box replace annually)
960-399800-000 H2S/MOS DRICAP w/desiccant (10 pack)
NOTE: FM Approvals require the product label to contain a marking to differentiate between
the enclosure types. If the enclosure uses Detcon’s aluminum enclosure, the product will be
marked as “TP-524D”. If the product uses Detcon’s 316SS enclosure, the product will be
marked as “TP-524DS”. If the product uses the aluminum Killark enclosure, the product will
be marked as “TP-524DK”.