Detcon FP-524HT - Manual (Page 20)

3.13 S
PARE
P
ARTS
L
IST
613-120000-700 Splashguard with Cal Port
600-003427-000 FP-High Temp Splashguard Adapter
365-037020-16H FP-HT Sensor Assembly
899-075M25-000 3/4 to M25 Adapter (used with P/N365-037020-16H to install in condulet)
925-525400-100 FP-524C Plug-in control circuit
500-005065-007 Connector board
327-000000-000 Programming Magnet
897-850800-000 3-port enclosure less cover
897-850700-000 Enclosure glass lens cover
960-202200-000 Condensation prevention packet (replace annually).
3.14 W
ARRANTY
Detcon, Inc., as manufacturer, warrants each LEL High Temp Sensor Assembly (part no. 365-037020-16H), for a
two year period under the conditions described as follows: The warranty period begins on the date of shipment to
the original purchaser and ends two years thereafter. The sensor element is warranted to be free from defects in
material and workmanship. Should any sensor fail to perform in accordance with published specif ications within
the warranty period, return the defective part to Detcon, Inc., 3200 A-1 Research Forest Dr., The Woodlands, Texas
77381, for necessary repairs or replacement.
3.15 S
ERVICE
P
OLICY
Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control circuit to
be free from defects in material and workmanship for a period of two years from the date of shipment to the origi-
nal purchaser. Detcon, Inc., further provides for a f ive year f ixed fee service policy wherein any failed transmitter
shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a f ixed fee of $55.00. The f ixed fee service
policy shall affect any factory repair for the period following the two year warranty and shall end f ive years after
Model FP-524HT Combustible Gas Sensor PG.20