Meter use – Delmhorst Instrument TechCheck PLUS User Manual
Page 5
Copyright
2009, Delmhorst Instrument Co.
Page 5 of 33
TO POWER THE METER ON:
To turn the meter on, press and hold the SELECT button for approx. 2 seconds.
The first screen will temporarily display the meter name and the software revision level.
Refer to this revision level whenever you call Customer Service.
The next screen is the MAIN MENU. Use the
п р с т keys to select the desired
function/mode and then press SELECT to activate the function.
METER USE
TO TAKE WOOD READINGS:
1. From the Main Menu, use the
ò
key to highlight WOOD. Then, use the SELECT key
to enter the WOOD screen.
2. The meter will display the WOOD screen, as shown below: