Depth of installation, Care of your meter – Delmhorst Instrument KS-D1 User Manual
Page 12

11
DEPTH OF INSTALLATION
The active root zone of the crop determines the depth at
which to place the blocks. Type of crop, soil depth, and
state of growth should also be considered.
When seeds are first planted, irrigation is necessary to assure
quick and uniform seed germination. Visual inspection of
the soil near the seeds will indicate whether irrigation is
needed at that time. A minimum of two blocks per station
is recommended; one shallow, one deep. The table below
gives recommended depths for setting the blocks according
to soil depth or active root zone.
Recommended depths for placing electrical resistance
blocks according to soil depth or active root zones.
Soil depth or
Shallow blocks
Deep blocks
active root zone
(Inches)
(Inches)
(Inches)
18
8
12
24
12
18
36
12
24
48
18
36
CARE OF YOUR METER
h Store your meter in a clean, dry place. The protective
carrying case is an ideal storage place when the meter
is not in use.
h Change the 9-Volt battery as needed. Continued use with
a low battery may cause the meter to go out of calibration.
h Clean the meter with any biodegradable cleaner.
Use the cleaner sparingly and on external parts only.
h Remove the battery if the meter will not to be used
for one month or longer.
KS-D1 Op ManualQ7.qxp:Layout 1 4/14/11 9:26 AM Page 11