Defelsko corporation, Variable tolerance, Warranty – DeFelsko PosiTector 6000 v.3.0 User Manual

Page 7

±0.01mm to 10, ±0.1 to 20

All others ±0.05 mils to 2, ±0.1 to 60

±1 µm to 50, ±2 to 1500

Variable Tolerance

Microprobes ±1% to 4mils (100µm), then

±3%

FHS ±1%, ±3%, ±5%

All others ±1%

Specifications for the "FN" Gages are the same as for the
"F" model when operating on ferrous substrates, and the
"N" model when operating on non-ferrous substrates.

Gage dimensions:

5.8" x 2.4" x 1.0"
147 x 61 x 25 mm

Gage Weight (without batteries):

6 ounces (170 grams)

Constant Pressure Probe Pressure:

3½ ounces (100 grams)

Maximum Pressure for Microprobes:

2 ounces (55 grams)

Operating Temperature:

+ 32° to + 120°F (0° to + 50°C)

Measuring Speed:

> 35 readings per minute

Warranty

The manufacturer fully warrants its products against defects
in workmanship or materials for a period of one year from
date of purchase. In the event that a Gage is found to be
defective, return the product with proof of purchase to your
dealer, and the defective product will be repaired or
replaced at the manufacturer's option.

No responsibility is assumed for incidental or consequential
damages.

The warranty is voided if the Gage has been opened.

Data subject to change without notice.

DeFelsko Corporation

802 Proctor Avenue, P.O. Box 676

Ogdensburg, New York 13669 USA

Tel: 315-393-4450
Fax: 315-393-8471

e-mail: [email protected]

Patents applied for

Printed in USA