Catskill Craftsmen 54220 - Manual (Page 13)

STEP 14
A. Invert Table Top on a smooth flat surface and
make a large ( X ) mark over each of the 4 pilot
holes in the bottom. Make marks about 1/2-1” long.
These marks will help you align the cabinet with the
pilot holes in the bottom of the Top.
B. Place the Cart Top on the cabinet. Open the
outside doors. Maneuver the Cart Top so that the
( X ) marks/pilot holes in the bottom of the Top align
with the holes in the “L” brackets. Secure top to “L”
brackets with 5/8” #7 screws.
STEP 15
A. Slide the drawer into the front of the cart. If necessary, adjust top front brace so that drawer moves
freely. Then retighten all bolts/nuts.
B. Tap in the 5/8 wooden plugs into the holes on the legs.
C. Install small middle and center shelves simply by sliding them in, edge banding out.