Catskill Craftsmen 54220 - Manual (Page 11)

STEP 10
A. Lay the cart on it’s back. Insert and tap caster sockets with hammer until the teeth grab the wood.
DON’T POUND SOCKET FLAT OR CASTER SHAFT WILL NOT ENTER.
B. Insert casters and seat by pushing
straight downward with heel of your hand,
or tap into place with a hammer. Don’t be
afraid to give them a good downward
whack on the solid metal part of the
caster!
C. Locking wheels usually go
on front.
STEP 11
A. Upright unit.
B. Determine if you want the Spice Rack on the left or right Side Panel. The Handle/Towel Bar will
go on the other. Then attach the Spice Rack to the Side Panel with two 1” #8 screws from inside
1” #8
the panel. Place
a washer over the
screw so that so
that the head won’t
pull through the side
panel. Use the pilot
holes in the top
shelf of the spice
rack.
C. Attach Towel
Bar to the other
Side Panel with
1” #8 screws from
inside the Side Panel.
Place a washer over
each screw.