Catskill Craftsmen 1481 - Manual (Page 6)

Push down on the black tab and pull out
Gets attached to the Drawer Side Gets attached to the Glide Support Brace
STEP 1
Take all of the glides and detach the inserts by fully extending the glides and pressing
down on the black tab and pulling them out.
Drawer Assembly
STEP 2
2 Drawer Sides, 1 Drawer Back, 1 Drawer Front, 1 Drawer Bottom
Attach Drawer Back to Drawer Sides using 1 1/4” #8 screws, then insert Drawer
Bottom into slots. Put bastion posts into Drawer Front & secure to Drawer Sides using barrel
nuts & set screws. When seated, hole in bastion post will be parallel long edge of Drawer
Front. Attach handle using HDL-M5-25 Screws. Screw the Glide Inserts to the drawer sides
using 7/16” Pan Head #6 screws.
1 1/4” #8 Screws
7/16” #6 Pan Head Screws
Bastion Post
DBK
DB
DF
RDS
LDS
See previous page for tips on how to use the bastion fastening system
Barrel nut & set screw
HLD-M5-25