Catskill Craftsmen 1481 - Manual (Page 12)

Glide Assembly
STEP 9
Tap the caster sockets into the holes in the bottom
of the leg with a hammer so the teeth bite into the
wood, but not too hard. Then tap the casters into the
caster sockets until seated. Put the locking casters
in the front of the cart.
Use the Fourth hole
and the eleventh
hole on the glide to
attach to support.
Use the first small
pilot hole and the
third small pilot hole
on the glide support.
Use the Sixth hole
and the thirteenth
hole on the glide
Use the Second
hole and the fourth
hole on the glide
support
Front
7/16” #6 Pan head screw