Alpine cda-9805 - Manual (Page 23)

21
-EN
Folder Search mode:
(You can search for your desired folder in the disc.)
2
Select the desired folder by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to play back the first
file in the selected folder.
NOTES
• Search mode is canceled by pressing and holding the
SEARCH button for at least 2 seconds in Folder Search
mode.
• While in Folder Search mode, press the SEARCH button to
switch to File Search mode.
• "NO FILE" is displayed for 2 seconds if the folder that is
selected by the Folder Search mode contains no files.
Quick Search Function
You can search for all Files.
1
Press and hold the SEARCH button for at least 2
seconds in MP3/WMA mode to activate Quick Search
mode.
2
Select the desired File by turning the Rotary encoder
within 10 seconds. The selected file is played back
immediately.
Playing MP3 Data
You can select either playback only of CD data, or
playback of formatted CD data and MP3 files.
When a disc contains CD or the MP3 file data, playback
starts from the CD data portion of the disc.
1
Press and hold the F/SETUP button for at least 3
seconds.
2
Press the f or g button to select "CD-DA/MP3."
3
Press the BAND/TEL. button to toggle the mode
between CD-DA and CD/MP3.
• CD-DA: Only CD data can be played back.
• CD/MP3: Both CD data and MP3 file tracks can be
played back.
4
Press the F/SETUP button to return to normal mode.
NOTE
Perform this setting before inserting a disc. If a disc has already
been inserted, perform the setting after you remove the disc. (If
you use an MP3 changer, you have to change discs)
∗ When an MP3 compatible CD changer with Repeat
All function is connected
NOTE
If an MP3 compatible CD changer is connected:
In CD changer mode, press the “F/SETUP” button to illuminate
the underlined portion of the FUNC indicator, and go to step 1
within 5 seconds.
M.I.X. (Random Play)
1
Press the 5 ( ) button in the play or pause mode.
The files on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the 5 ( ) button again to
turn off the M.I.X.
↓
M.I.X.: Only files in a folder are played back in
random sequence.
↓
M.I.X.: Files are played back in random sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
↓
(off)
NOTE
In case an MP3 compatible CD changer is connected:
In CD changer mode, press the “F/SETUP” button to illuminate
the underlined portion of the FUNC indicator, and go to step 1
within 5 seconds.
Scanning files
1
Press the 6 ( ) button to activate the Scan mode.
The first 10 seconds of each file will be played back in
succession.
To stop scanning, press the 6 ( ) button and
deactivate the Scan mode.
NOTE
If an MP3 compatible CD changer is connected:
In CD changer mode, press the “F/SETUP” button to illuminate
the underlined portion of the FUNC indicator, and go to step 1
within 5 seconds.
Folder/File Search Function
1
When setting MP3/WMA mode, press the SEARCH
button to select between Folder Search mode or File
Search mode.
File Search mode:
2
Press the 8 or 9 button to select another Folder.
3
Select the desired file by turning the Rotary
encoder within 10 seconds.
4
Press the Rotary encoder to play back the
selected file.
NOTES
• File Search mode is canceled by pressing and holding the
SEARCH button for at least 2 seconds.
• While in File Search mode, press the SEARCH button to
change back to Folder Search mode.