Alpine cda-9805 - Manual (Page 17)

15
-EN
Automatic Memory of Station Presets
1
Press the BAND/TEL. button repeatedly until the
desired radio band is displayed.
2
Press and hold the TUNE/A. ME button for at least 2
seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons 1 to
6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.
Tuning to Preset Stations
1
Press the BAND/TEL. button repeatedly until the
desired band is displayed.
2
Press the station Preset button that has your desired
radio station in memory.
The display shows the band, preset number and
frequency of the station selected.
Station Title Search Function
If titles for radio stations are entered, you can search for
a radio station from its title.
1
Press the SEARCH button in Radio mode to switch
to Title Search mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary encoder
within 10 seconds.
3
Press the Rotary encoder to receive the frequency of
the selected title.
NOTE
Search mode in Title Search mode is canceled by pressing and
holding the SEARCH
button for at least 2 seconds.
Quick Search Function
You can search for radio stations by their frequencies.
1
Press and hold the SEARCH button for at least 2
seconds in Radio mode to activate Frequency Search
mode.
2
Select the desired frequency by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to receive the selected
frequency.
NOTE
Search mode in Quick Search mode is canceled by pressing and
holding the SEARCH
button for at least 2 seconds.