Aposonic A-S1604R20A User Manual
Page 68
- 68 -
always Control Protocol, and the other settings (Baud Rate, Data Bit,
Stop Bit, and Parity) are the same as the PTZ Model selected.
Please also note that the installer must be sure that the Keyboard
Control Protocol and the PTZ Protocol won
’t conflict with each other.
Baud Rate – press +/- buttons to change the value.
Data Bit – press +/- buttons to change the value.
Stop Bit – press +/- buttons to change the value.
Parity – (Odd, Even, or None). Press +/- buttons to change the value.
DVR/Camera ID – for PTZ/Keyboard => the device ID for this digital
video/audio recorder, and it must not conflict with the other devices connected in
the same control port.; for GPS/POS => the Camera ID to receive the GPS/POS
data,
“Multiple” for POS means multiple POS connected and camera 1 for
POS ID 1, camera 2 for POS ID 2, etc.
Please note that Multiple POS is
added for RS-232 port only.
Press +/- buttons to change the ID.
Some GPS Devices Tested
HOLUX GR-213 G-Mouse GPS Receiver
Garmin GPS 18 OEM
GlobalSat BR-355 Cable GPS