Asus P/I-XP6NP5 - Manual (Page 26)

20 ASUS P/I-XP6NP5 User’s Manual
III. INSTALLATION
(Connectors)
III. INST
ALLA
TION
5. ATX Power Connector (20-pin block)
This connector connects to a ATX power supply. The plug from the power
supply will only insert in one orientation because of the different hole sizes.
Find the proper orientation and push down firmly making sure that the pins are
aligned.
CAUTION: To prevent electrical spikes, make sure that the power supply is
not connected to an outlet when making or removing connections. Power
supplies contain power reserves which can damage electrical components.
ATX Power Connector
on Motherboard
3.3V
-12.0V
GND
PS-ON
GND
GND
GND
-5.0V
5.0V
5.0V
PW-0K
12.0V
3.3V
3.3V
GND
5.0V
GND
5.0V
GND
5VSB
6. Floppy Drive Connector (34-pin block )
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to one or
two floppy drives. (Pin 5 is removed to prevent inserting in the wrong orien-
tation when using ribbon cables with pin 5 plugged).
Floppy Drive Connector
Pin 1