Maintenance / care, Cleaning the generator, Air cleaner maintenance – WEN 56100 Power Pro 2 Stroke 1000 Watt User Manual
Page 19: Warning

16
STOPPING THE GENERATOR
To stop the generator:
1. Turn off all electrical devices prior to unplugging them from the generator. Unplugging
running devices can cause damage to the generator.
2. Turn the start switch to the “off” position. (Move Rocker Switch to Lower position).
3. Turn the fuel valve to the “off” (horizontal) position.
WARNING:
Allow the generator to cool for several minutes before touching
areas that become hot during use.
CAUTION: Allowing fuel to sit in the generator tank for long periods of time without use
can make it difficult to start the generator in the future. Never store generator for extended
periods of time with fuel in the tank.
MAINTENANCE / CARE
Proper routine maintenance of your generator will help prolong the life of your machine. Please
perform maintenance checks and operations according the schedule in figure 9.
If you have questions about any of the maintenance procedures listed in this manual, please
call (800) 232-1195 M-F 8-5CT.
CAUTION: Never perform maintenance operations while the generator is running.
Recommended Maintenance Schedule
each use
first month
then every
20 hrs
every 3
months or
50 hrs
every 6
months or
100 hrs
every year
or 300 hrs
Air cleaner
check
X
clean
x
Spark plug
check/ clean
x
Fuel tank
check fuel level
X
clean
x
Fig. 9 - Recommended maintenance schedule
Cleaning the Generator
Never clean the generator when it is running! Never clean with a bucket of water or a hose. Water
can get inside the working parts of the generator and cause a short circuit or corrosion.
Always try to use the generator in a cool, dry place. If the generator becomes dirty, clean the
exterior with a damp cloth, a soft brush, vacuum or pressurized air.
Air Cleaner Maintenance
Routine maintenance of the air cleaner helps maintain proper air flow to the carburetor. Check that
the air cleaner is free of excessive dirt.