Maintenance, Consumer advice – Vitrex 103500 User Manual
Page 8

Everest Road
Lytham St Annes
Lancashire
FY8 3AZ
Tel: +44 (0) 1253 789180
Fax: +44 (0) 1253 789182
www.vitrex.co.uk
Maintenance
• Always check the blade before use for
cracks or signs of damage.
• Ensure that the reservoir is filled up to the
recommended level. Do not overfill or
allow it to run dry.
• Always clean the machine after use, after
first ensuring that it is disconnected from
the mains.
• Rinse out reservoir thoroughly to remove
all sludge and wipe down outside of
machine using a cloth or sponge.
• When not in use, store the electrical cable
and plug under the machine in the space
provided.
• No other servicing is required in normal
use. No attempt should be made to repair
or replace internal components as this will
invalidate any claim whilst the product is
under guarantee.
Consumer Advice
• Do not dispose of electrical products
with your normal household waste.
• Always use recycling facilities
whenever possible.
• Additional recycling information can
be found through your local Authority
or Retailer.
Q.E.P. Co UK Ltd is committed to a continuing program of product improvement.
Consequently, please be advised that specifications, performance, appearance,
and dimensions of QEP/Vitrex products are subject to change without notice. For
more up-to-date information about our range of products, please contact our
Customer Service Office on +44 (0)1253 789180 or your local distributor.
• For further information or advice,
please call the Vitrex Technical Helpline
on +44 (0) 1253789180.
This electric tile cutter has been manufactured to a high quality standard. It is guaranteed against faulty materials and
workmanship for 12months from the date of purchase. Any claim must be accompanied by a valid till receipt as proof of purchase.
A faulty machine will either be repaired or replaced free of charge. If a direct replacement is not available, an alternative to the
same or greater value/specification will be offered.
This guarantee does not cover machine defects caused by or resulting from:
a) Misuse, abuse or neglect, b) Trade, Professional or hire use, c) Repairs attempted by anyone other than our authorised repair
agent, d) Ingress of foreign objects, substances or accident
In the unlikely event of a fault occurring, contact should be made through the Vitrex Technical Helpline +44 (0) 1253 789180
The above guarantee is only valid within the UK and does not affect your statutory rights.
The guarantor is Q.E.P. Co. UK Ltd., Everest Road, Lytham St. Annes, Lancashire, FY8 3AZ (Registered No. 04988177 England).