Charging the battery, Powering the tr-206 on/off – USGlobalsat TR-206 User Guide User Manual
Page 13

TR-206
page 13
Charging the battery
If you are using the TR-206 for the first time, charge 
the TR-206 for at least 5 hours. (The included battery is 
manufacturer-approved for use with the TR-206 tracker. 
The use of any other battery might damage the tracker. 
If you need to change/return the battery, contact your 
local dealer.) 
Powering the TR-206 On/Off
Power On
:Press and hold the Power key for 3 seconds.
The LCD and backlight will turn on. If you are turning on 
the TR-206 for the first time the TR-206 will automatically 
adjust the time after the tracker gets a GPS fix.  
 
Power Off
:Press and hold the Power key for 3 seconds.
To make sure that the TR-206 is turned off, the 
statement “Shutting down” will be shown on the screen 
just before it powered down. 
