beautypg.com

Triton FT5000 Quick Reference Guide User Manual

Page 2

background image

CASSETTE / DAY CLOSE

REPLACING RECEIPT PRINTER PAPER

JOURNAL

REPLENISHING CASSETTE

2

6

4

8

1

5

7

3

PERFORM STEP 1 OF THE CASSETTE CLOSE
PROCEDURES. AFTER CASSETTES ARE UNLOCKED,
GRASP THE CASSETTE HANDLE WITH ONE HAND
WHILE HOLDING THE MECHANISM
WITH THE OTHER. PULL
THE CASSETTE OUT
SLIGHTLY, THEN PLACE
ONE HAND UNDERNEATH
AS YOU SLIDE IT OUT.

PLACE CASSETTE ON TABLE OR FLAT SURFACE.
INSERT THE KEY INTO THE CASSETTE LOCK AND
APPLY INWARD PRESSURE ON KEY WHILE TURNING
CLOCKWISE TO THE STOP POSITION. OPEN
CASSETTE BY SIMULTANEOUSLY PRESSING THE
RELEASE BUTTON AND LIFTING THE LID. FLIP THE
LID BACK FULLY, LETTING IT REST ON THE FLAT
SURFACE.

MOVE THE PUSHER PLATE TOWARDS THE
CASSETTE HANDLE TO PROVIDE SPACE FOR
NOTES THAT ARE LOADED. PLATE SHOULD STAY IN
PLACE. LOAD CURRENCY USING 1"- 2" STACKS OF
CURRENCY.

LEVEL NOTE PILE BY HAND. AVOID PUSHING TOO
HARD THAT MAY CAUSE BENDING OR FOLDING OF
NOTES. MOVE THE PUSHER PLATE AGAINST THE
NOTES WITH ENOUGH PRESSURE TO HOLD THE
NOTES BEFORE CLOSING THE LID.

PLACE VAULT ON TABLE OR FLAT SURFACE. INSERT
THE KEY INTO THE CASSETTE LOCK AND APPLY
INWARD PRESSURE ON KEY WHILE TURNING
CLOCKWISE TO THE STOP POSITION. OPEN VAULT
BY SIMULTANEOUSLY PRESSING THE RELEASE
BUTTON AND LIFTING THE LID. FLIP THE LID BACK
FULLY, LETTING IT REST ON THE FLAT SURFACE.

RETRIEVE ANY REJECTED NOTES. CLOSE THE VAULT
LID TO ITS LOCKED POSITION. THE RELEASE BUTTON
SHOULD “POP” OUT. TURN THE KEY COUNTER-
CLOCKWISE TO LOCK THE CASSETTE. SLIDE VAULT
INTO ITS SLOT IN THE MECHANISM FULLY.

REPLENISHING CASSETTE

1

4

7

CUT REMAINING PAPER TO ALLOW
REMOVAL.

PRESS FEED BUTTON TO CLEAR
PAPER FROM PAPER PATH.

LIFT SPINDLE TO TAKE-OUT HOLE
AND REMOVE PAPER ROLL AND
SPINDLE.

REMOVE SPINDLE FROM OLD
PAPER ROLL.

PLACE SPINDLE IN NEW PAPER
ROLL.

FEED END OF PAPER INTO FEED
SLOT.

PLACE NEW PAPER ROLL ON
BRACKET. MAKE SURE PAPER FEEDS
FROM TOP!

PAPER WILL FEED AUTOMATI-
CALLY.

2

6

5

3

8

THIS AREA FOR SERVICE PROVIDER

CONTACT INFORMATION:

STEP

ACTION STEP

ACTION STEP

ACTION

STEP

ACTION

ACTION

STEP

ACCESS MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS AND SELECT THE ELECTRONIC JOUR-
NAL OPTION. TO CLEAR THE JOURNAL: SELECT THE CLEAR JOURNAL OPTION. THIS WILL MARK ALL
UNAUDITED JOURNAL RECORDS. AUDITED RECORDS MAY BE PRINTED USING THE DISPLAY LAST X OR
VIEW JOURNAL ARCHIVE OPTIONS.

ACCESS MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS AND SELECT THE ELECTRONIC JOUR-
NAL OPTION. TO PRINT THE JOURNAL, SELECT THE DISPLAY UNAUDITED RECORDS. A PRINT OPTION IS
AVAILABLE TO PRINT ALL RECORDS THAT HAVE NOT BEEN AUDITED. THE RECORDS WILL BE MARKED.
TO PRINT PREVIOUSLY AUDITED OR PRINTED JOURNAL RECORDS, USE THE DISPLAY LAST X OR VIEW
JOURNAL ARCHIVE OPTIONS.

SELECT DAY CLOSE OPTION. SELECT PRINT OPTION TO PRINT A RECEIPT. NOTE: IF ATM DAY CLOSE IS
NOT PERFORMED AT SAME TIME AS PROCESSOR, HOST SETTLEMENT AMOUNT MAY NOT MATCH TER-
MINAL SETTLEMENT AMOUNT ON DAY CLOSE RECEIPT.

PROCEED WITH STEP 3 OF THE CASSETTE CLOSE
PROCEDURES.

PRINT JOURNAL

CLEAR JOURNAL

1. GO TO MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT TERMINAL CLOSE FUNCTIONS.

CHOOSE CASSETTE CLOSE OPTION. ENSURE SELECT CASSETTE(S) ARE CHECKED ( ). SELECT ENTER
TO CLEAR THE TOTALS. SELECT PRINT OPTION TO PRINT A RECEIPT.

2. CASSETTES WILL UNLOCK AND REPLENISH CASSETTES PROMPT APPEARS. REMOVE ALL CASSETTES.

COUNT CASH. CASH IN CASSETTES (INCLUDING REJECT CASSETTE) SHOULD EQUAL REMAINING
AMOUNT VALUE ON RECEIPT.

3. LOAD CASSETTES, USING REPLENISHING CASSETTE PROCEDURES. REPLACE CASSETTE. PRESS ENTER

WHEN COMPLETED. CASSETTES WILL LOCK AND A DIALOG APPEARS TO SELECT WHICH CASSETTES
TO PLACE IN SERVICE. ENSURE CASSETTES SELECTED ARE CHECKED ( ). PRESS ENTER AND THE
ENTER CASSETTE QUANTITY SCREEN APPEARS. ENTER NUMBER OF BILLS LOADED IN SELECTED CAS-
SETTES. TRIAL CASSETTE CLOSE PROMPT APPEARS. SELECT PRINT OPTION TO PRINT A RECEIPT AS
RECORD OF CASSETTES. PRESS ENTER WHEN DONE.

CASSETTE CLOSE

DAY CLOSE

STEP

ACTION

ACTION

EXTEND THE “PAWLS” FULLY (INSERT) ON THE
PACKER PLATE. CLOSE THE CASSETTE LID TO ITS
LOCKED POSITION. THE RELEASE BUTTON SHOULD
“POP” OUT. TURN THE KEY COUNTER-CLOCKWISE
TO LOCK THE CASSETTE. SLIDE CASSETTE INTO ITS
SLOT IN THE MECHANISM FULLY.

TO REMOVE REJECT VAULT (TOP CHANNEL), GRASP
THE VAULT HANDLE WITH ONE HAND WHILE
HOLDING THE MECHANISM WITH THE OTHER. PULL
THE VAULT OUT SLIGHTLY, THEN PLACE ONE HAND
UNDERNEATH AS YOU SLIDE IT OUT.

STEP

PAWL EXTENDED