Tennsco L-6000 - Manual (Page 4)

ORDER REPLACEMENT PARTS DIRECT FROM TENNSCO
Please provide the following information: Contact: Tennsco Corp., P.O. Box 1888
•
Model number Dickson, TN 37056-1888
•
Part description and number as shown above (800) 251-8184 (800) 722-0134 FAX
•
Color Or fill out form at http://www.tennsco.com
1 Back
(Quantity: 1)
(Part No. B-3860)
2 Uprights
(Quantity: 2)
(Part No. L-0960)
3 End Panels
(Quantity: 2)
(Part No. L-60E)
4 Bottom Shelf
(Quantity: 1)
(Part No. L-9B)
5 Top Shelf
(Quantity: 1)
(Part. No. L-0938)
6 Adjustable Shelves
(Quantity: 4)
(Part No. L-9)
7 Tinnerman Clip
(Quantity: 14)
C1787
9 10-24 x 1 / 2 " Bolts & Nuts
(Quantity: 12 each)
(Available Locally)
11 Shelf Divider
(Quantity: 5)
(Part No. L-1)
8 #10 x 1 / 2
" Sheet Metal
Screws (Quantity: 14)
(Available Locally)
10 3/8" Nut Driver Tool w/
Screwdriver Insert (Qty: 1)
(Part No. TOOL-3)
11. A. Bolt back to top using three
10-24 x 1/2 bolts and nuts.
B. Bolt rear corners at back to top
using sheet metal screws in
tinnerman clips already
inserted.
B
B
A
12. Bolt front of top to each upright using two
tinnerman clips (which were inserted in
step 9) and two sheet metal
screws.
These holes are
hidden underneath the
front lip of the
bookcase top.
11
14. Place the five dividers (Ref.
No. 11) as desired. Your 6000
Bookcase is now ready for
use.
13. Slide all remaining shelves
into desired position.
PARTS LIST
Numbers in upper left hand corner correspond to the reference numbers given throughout the instructions.
Some extra hardware may be included with your unit. Any extra pieces not listed below may be discarded.