Assembly instructions model # sp-65 – SnowEx SP-65 User Manual
Page 9
© TrynEx International 2013 (REV B) F50753
9
Assembly Instructions
Model # SP-65
STEP 9
Put bolt through both handles at the base. Hand-Tighten only.
STEP 10
Put Handle Assembly onto frame. Insert Bolts. Hand-Tighten.
STEP 11
Tighten Bolts holding the handle together, then tighten the bolts
holding the handle to the frame.
STEP 12
Put Cable Lever into Off position. Pull Gate as far back as possible.
Attach Cable to Gate.
See also other documents in the category SnowEx For the car:
- SD-95 (24 pages)
- PWS-100 (40 pages)
- PPT-175 (1 page)
- PMT-175-C (3 pages)
- PMT-175 (3 pages)
- OFK-020 (2 pages)
- MGK-020 (2 pages)
- HRK-020 (8 pages)
- GAK-020 for SP-575 and SP-1075 (2 pages)
- DRM-175 (2 pages)
- ADF-020 For SP-575 and SP-1075 (2 pages)
- PWX-200 (28 pages)
- RHT-375 (2 pages)
- RHT-380 (12 pages)
- SD-600 Installation (12 pages)
- SD-600 Owners Manual (12 pages)
- TPR-020 (2 pages)
- SL-80 (28 pages)
- SP-100 (25 pages)
- SP-575X (28 pages)
- SP-725G (21 pages)
- SP-125 / US-100 (27 pages)
- SP-1575 (32 pages)
- SP-3000 (31 pages)
- Bulk-Pro 1875 (51 pages)
- SP-2400 (35 pages)
- SP-2200 (36 pages)
- SP-7000 Assembly Instructions (12 pages)
- SP-7000 Owners Manual (16 pages)
- SP-7550 (36 pages)
- SP-85 (28 pages)
- SP-8550 (37 pages)
- SP-8500 (34 pages)
- SR-110 (28 pages)
- VBR-400 (12 pages)
- SP-9800X (40 pages)
- SP-9500X (40 pages)
- SP-9300X (40 pages)
- SP-9300 (40 pages)
- Wireless Spreader Key Fob Mating (1 page)
- SS-4000 (24 pages)
- SSH-175 (1 page)
- TLR-175 (1 page)
- TPM-175 (1 page)