ShelterLogic 23521 10 x 20 Max AP Compact Canopy - Manual (Page 4)

05-23521-0D Page 4
A
10431 13103
10075
2. AsseMBle rOOF FrAMe
Swedged Tubes Connections
13104
Crimp Marks
13103
NOTE: Swedged tubes insert into plain ends at the crimp marks.
3. AsseMBle leGs & AttACH tO rOOF FrAMe
Leg Pole Assembly
13105
13103
10075
A. Attach all legs to one side first. Let the other side of roof frame rest on the
ground. Repeat for opposite side.
4. ANCHOr tHe FrAMe
There are four holes on each base foot that the anchor can go into.
A . Select a hole in each base foot. Insert each anchor (10431) into the ground until the round head is touching the
base foot. These anchors prevent the canopy from shifting. Insert one anchor into all four base feet.
This is a temporary spike anchor. Not intended for permanent use.
B
. To securely anchor canopy, Accessory Anchoring Kit #10073 is recommended. The 4-anchor pins are inserted
into the ground. Then the ropes are tied from the anchors to the corner tees as shown in B.
Anchoring Base Feet Tie Rope Around Frame Corners
13105
rope
13101
13104
13103
B A