Seed Hawk GRANULAR AND LIQUID TANKS 2009 - Manual (Page 21)

Seed Hawk Manual Granular and Liquid Tanks Page 19
4.1.1 Positioning the Auger
NOTE: Ensure that the area in the vicinity of auger operation is free of
obstructions and that all bystanders, especially children, are kept at a
safe distance before positioning or operating the auger.
1. Please ensure your tractor
circuit is engaged in the
correct direction prior to
engaging the auger diverter
valve. If circuit is already
engaged direct the fan diverter
valve to the fill auger position
from the fan location. FIG 1.
Use the remote provided to
move the auger in and out of
transport. NOTE: If remote
does not operate properly
use manual levers to keep
using the auger.
2. Unlock lever to take out of
transport 1 FIG 2. Move the
outer arm first when positioning
auger.
1 FIG 3
3. Unfold auger and position it
where filling and emptying the
tank is optimal.
4. Hydraulic cylinder will hold in
position so auger will not move
if positioned on level ground.
5. Allow hopper to come into
contact with the ground before
final positioning.
FIG. 3
1
1
FIG. 2
FIG. 1