Seca EMR Flash 101 - Manual (Page 15)

Operation • 15
English
NOTICE!
Incorrect measurement if wrong devices
selected
If the wrong devices are selected, measured
results may be assigned to the wrong patient or
measurements may not be received at all.
► Use the name of each device to check you
have selected the correct devices.
4. Perform the measurement(s) on the patient.
5. On the measuring devices, press the send button (if
button has two functions, press button briefly).
The measurements are transmitted to the
seca 101
PC software.
NOTICE!
Loss of data
If there is no input for approx. 10 minutes,
partial results are discarded.
► Measure one patient's weight and height
immediately consecutively.
NOTE:
On
seca 360° wireless devices with activated
Autosend function, measurements are transmit-
ted to the PC software automatically as soon as
a hold value is available.
6. Check that the measured values are displayed in
the Weight / Height fields of the PC software:
NOTE:
• If you are not sure whether automatic data
transfer is activated on your
seca 360° wireless devices, contact your
administrator.
• Measurements will be displayed in the units
selected as defaults in the PC software,
regardless of the settings used on the
measuring devices.
send
print