SANDPIPER MHP2M - Manual (Page 9)

mhp2mdl4sm-rev0513 Model MHP2M Page 9
SH2-M TYPE 7
SANDPIPER PUMP - ADDER SHEET
ITEM PART NO. DESCRIPTION QTY
A. 196-002-155 Outer Chamber (1)
196-002-010 Outer Chamber (1)
B. 170-060-330 Hex Head Cap Screw (8)
D. 807-008-330 Stud (8)
E. 547-002-110 Stop Nut (4)
F. 670-005-110 Flap Valve Retainer (2)
G. 570-001-360 Hinge Pad Flap Valve (2)
570-001-363 Hinge Pad Flap Valve (2)
570-001-364 Hinge Pad Flap Valve (2)
570-001-365 Hinge Pad Flap Valve (2)
H. 338-005-360 Flap Valve (2)
338-005-363 Flap Valve (2)
338-005-364 Flap Valve (2)
338-005-365 Flap Valve (2)
338-010-357 Flap Valve (2)
I. 334-014-156 Suction Flange (1)
334-014-010 Suction Flange (1)
J. 807-018-110 Stud (4)
K. 900-005-330 Lock Washer (8)
L. 545-005-330 Hex Nut (8)
M. 334-015-156 Discharge Flange (1)
334-015-010 Discharge Flange (1)
N. 722-070-360 Flap Valve Seat (2)
722-070-363 Flap Valve Seat (2)
722-070-364 Flap Valve Seat (2)
P. 115-062-080 Left Hand Mounting Foot (1)
Q. 115-063-080 Right Hand Mounting Foot (1)
R. 115-075-080 Mounting Bracket Assembly (1)
T. 618-003-330 Pipe Plug (2)
NEW SH2-M PARTS
ITEM PART NO. DESCRIPTION QTY.
9. 115-067-080 Mounting Bracket Assembly (1)
16. 170-024-330 Hex Head Capscrew (2)
20. 170-052-330 Hex Head Capscrew (6)
21. 170-057-330 Hex Head Capscrew (2)
22. 170-060-330 Hex Head Capscrew (8)
24. 326-003-080 Mounting Foot (1)
31. 545-007-330 Hex Nut (2)
48. 900-004-330 Lock Washer (2)
49. 900-006-330 Lock Washer (2)
51. 901-005-330 Flat Washer (6)
52. 050-000-000 Check Ball (2)
53. 115-000-000 Mounting Bracket (1)
55. 196-000-000 Outer Chamber (1)
57. 312-046 000 90° Street Elbow (1)
58. 334-000-000 Suction Flange (1)
59. 334-000-000 Discharge Flange (1)
60. 618-003-000 Pipe Plug (1)
61. 722-000-000 Check Valve Seat (2)
EH2-M PARTS REPLACED
FLAP CHECK VALVE SERVICING
Valve inspection requires removal of (4) 3 /
8
" hex nuts.
On the suction side the flange, when removed, carries
the valve and seat as an assembly. On the discharge
side, the valve and seat will stay with the diaphragm
housing. Visual inspection and cleaning is possible. If
parts are to be replaced, remove the self locking nuts
and all parts are accessible.
The SH2-M Type 7
SANDPlPER Pump is
a flap valve version of
the EH2-M pump.
The SH2-M pump is
identical to the EH2-M
except for the wetted
parts.
New items on SH2-M
pump are as shown
on this exploded view.
Part numbers are
shown below.