SANDPIPER MPB 1/4 - Manual (Page 12)

mpb025nmdl3sm-rev0913 Page 10
Solenoid Shifted Option Drawing
SOLENOID SHIFTED AIR VALVE PARTS LIST
(Includes all items used on Composite Repair Parts List except as shown)
ITEM PART NUMBER DESCRIPTION QTY
22 675-047-115 Ring, Retaining - Pilot Plug Sleeve 2
44 755-037-000 Pilot Plug Sleeve with O-rings 1
45 360-106-360 Gasket, Intermediate Bracket 1
46 241-001-000 Connector, conduit 1
47 893-095-000 Solenoid Valve, NEMA 4 1
48 219-001-000 Solenoid Coil, 24 VDC 1
219-004-000 Solenoid Coil, 24 VAC/12 VDC 1
219-002-000 Solenoid Coil, 120 VAC 1
219-003-000 Solenoid Coil, 240 VAC 1
49 866-068-000 Tube Fitting 1
50 538-083-555 Nipple 1
51 835-009-555 Tee, Pipe 1
52 860-062-540 Tubing 1
53 866-069-000 Tube Fitting 1
FOR EXPLOSION PROOF SOLENOID VALVE
48 219-009-001 Solenoid Coil, 120VAC 60 H
z
1
219-009-002 Solenoid Coil, 240VAC 60 H
z
1
219-009-003 Solenoid Coil, 12VDC 1
219-009-004 Solenoid Coil, 24VDC 1
219-009-005 Solenoid Coil, 110VAC 50 H z 1
219-009-006 Solenoid Coil, 230VAC 50 H
z
1
ASSEMBLY INSTRUCTIONS: Must Be
Performed Prior To Start-Up. The tee (item
51), nipple (item 50), fitting (item 53) and
tubing (item 52) have been pre-assembled at
the factory. Thread this assembly into the air
inlet cap (item 9). Be careful not to over tighten.
Push the free end of the tubing into the fitting
(item 49) which is attached to the valve.