SANDPIPER M20 Metallic - Manual (Page 14)

m20mdl1sm-rev0114 Model M20 Metallic Page 12
Composite Repair Parts Drawing
476-227-000 AIR END KIT (Aluminum Center)
Seals, O-ring, Gaskets, Retaining Rings, Air Valve
Sleeve and Spool Set and Pilot Valve Assembly.
476-227-010 AIR END KIT (Use With Cast Iron Centers)
476-227-110 AIR END KIT (Use With Stainless Steel Centers)
476-170-558 AIR END KIT (Air Valve with Stroke Indicator Pin, Aluminum Center)
Seals, O-ring, Gaskets, Retaining Rings, Air Valve
Sleeve and Spool Set, and Pilot Valve Assembly.
476-042-360 WET END KIT
Nitrile Diaphragms, Balls, and Seats.
476-042-354 WET END KIT
Santoprene Diaphragms, Santoprene Balls and EPDM Seats.
476-042-365 WET END KIT
Neoprene Diaphragms, Balls and Seats.
476-042-633 WET END KIT
FKM Diaphragms, PTFE Balls and FKM Seats.
476-042-635 WET END KIT
Neoprene Diaphragms, PTFE Overlay, PTFE Balls
and PTFE Seats.
476-042-364 WET END KIT
EPDM Diaphragms, Balls and Seats.
476-042-654 WET END KIT
Santoprene Diaphragm, PTFE Overlays, PTFE Balls, PTFE Seats.
476-042-659 WETTED END KIT
One-PIece Bonded PTFE/Nitrile Diaphragm,
PTFE Balls, PTFE Seats.
475-216-000 MIDSECTION CONVERSION KIT
(Replaces Aluminum Midsection With Cast Iron
Components) Air Inlet Cap, Intermediate Bracket, Inner
Chamber and Inner Diaphragm Plates.
Hardware Kits
475-200-330 Zinc Plated Capscrews, Washers, and Hex Nuts.
475-200-115 Stainless Steel Capscrews, Washers, and Hex Nuts.
** Electronic Leak Detector Kits
032-037-000 100-120/220-290 VAC
032-045-000 12-32 VDC
Torque:
90 in. lbs.
Torque:
90 in. lbs.
Torque:
Plate to Rod
360 in. lbs.
Torque:
Plate to Plate
480 in. lbs.
600 in. lbs. Santoprene
Torque:
360 in. lbs. Aluminum
and Stainless Steel,
500 in. lbs. Cast Iron
Available Service And Conversion Kits
Overlay
Diaphragm Option
**Note: Pumps equipped with these components are not ATEX compliant
One-Piece Bonded
Diaphragm Option