SANDPIPER T30 - Manual (Page 13)

t30mdl1sm-rev0614
sandpiperpump
.
com Model T30 Metallic •
10
Material Codes -
The Last 3 Digits of Part Number
Air Distribution Valve Assembly
IMPORTANT
Read these instructions completely, before installation
and start-up. It is the responsibility of the purchaser
to retain this manual for reference. Failure to comply
with the recommendations stated in this manual will
damage the pump, and void factory warranty.
Air Distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1: Remove Hex Head Cap Screws (1-F).
Step 2: Remove end cap (1-E).
Step 3: Remove spool part of (1-B) (caution: do not scratch).
Step 4: Press sleeve (1-B) from body (1-A).
Step 5: Inspect O-Ring (1-D) and replace if necessary.
Step 6: Lightly lubricate O-Rings (1-D) on sleeve (1-B).
Step 7: Press sleeve (1-B) into body (1-A).
Step 8: Reassemble in reverse order, starting with step 3.
Note: Sleeve and spool (1-B) set is match ground to a specified clearance
sleeve and spools (1-B) cannot be interchanged.
Air Valve Assembly Parts List
(Use w/Aluminum centers only)
Item Part Number Description Qty
1 031.183.313 Air Valve Assembly 1
1-A 095.109.313 Body, Air Valve 1
1-B 031.139.000 Sleeve and Spool Set 1
1-C 132.029.357 Bumper 2
1-D 560.020.360 O-Ring 10
1-E 165.127.313 Cap, End 2
1-F 170.032.115 Hex Head Capscrew 1/4-20 x .75 8
1-G 901.037.115 Lockwasher 8
Air Valve Assembly Parts List
(Use w/Stainless Steel centers only)
Item Part Number Description Qty
1 031.179.000 Air Valve Assembly 1
1-A 095.109.110 Body, Air Valve 1
1-B 031.139.000 Sleeve and Spool Set 1
1-C 132.029.357 Bumper 2
1-D 560.020.379 O-Ring 10
1-E 165.127.110 Cap, End 2
1-F 170.032.115 Hex Head Capscrew 1/4-20 x .75 8
4: AIR
END