SANDPIPER HDB2 - Manual (Page 17)

hdb2smdl3sm-rev0614 Model HDB2 Page 15
Available in kit form. Order P/N 031.055.000., which also includes items 6, 8, 18, 61.
**BOTTOM PORTING is recommended for pumping material containing solids which could settle out in the pumping chambers.
**TOP PORTING is recommended if there is a possibility of entrapped air vapors inhibiting the pumping action.
NO. PART NUMBER DESCRIPTION RQD.
50 360.049.425. Gasket, Flange 2
360.049.603. Gasket, Flange 2
51 360.050.379. Gasket, Manifold 4
360.050.384. Gasket, Manifold 4
360.050.608. Gasket, Manifold 4
52 618.003.110. Pipe Plug 4
618.003.112. Plug, Pipe 4
618.003.330. Plug, Pipe (Cast Iron and Aluminum wetted end) 4
53 675.013.360. Ring, Sealing 2
675.013.365. Ring, Sealing 2
675.013.363. Ring, Sealing 2
675.013.364. Ring, Sealing 2
675.013.600. Ring, Sealing 2
54 050.017.360W. Ball, Check Valve 4
050.017.364W. Ball, Check Valve 4
050.017.354. Ball, Check Valve 4
050.017.365W. Ball, Check Valve 4
050.018.600. Ball, Check Valve 4
55 115.057.080. Bracket, Foot Mtg. 2
56 900.004.330. Washer, Lock 2
57 545.004.330. Nut, Hex 2
58 286.020.604. Diaphragm 2
59 901.025.115. Washer 2
62 618.003.330. Pipe Plug (air end) 2
63 570.009.360. Pad, Wear (Not used on PTFE units) 2
570.009.363. Pad, Wear 2
570.009.364. Pad, Wear 2
570.009.365. Pad, Wear 2
NOT SHOWN:
031.019.010. (Cast Iron Center) (1)
031.019.156. (Aluminum Center) (1)
Includes items 10, 11, 12, 13, 14, 15, 16