RIKON Power Tools 80-805 - Manual (Page 9)

SAFETY INSTRUCTIONS
EXTENSION CORDS
Keep the extension
cord clear of the working area. Position
the cord so that it will not get caught on
lumber, tools or other obstructions while
you are working with a power tool.
Check extension
cords before each use. If damaged
replace immediately. Never use a tool with
a damaged cord, since touching the
damaged area could cause electrical
shock, resulting in serious injury.
Use a proper extension cord. Only use cords
listed by Underwriters Laboratories (UL).
Other extension cords can cause a drop in
line voltage, resulting in a loss of power and
overheating of tool. When operating a power
tool outdoors, use an outdoor extension cord
marked “W-A” or “W”. These cords are rated
for outdoor use and reduce the risk of electric
shock.
Page 8
SPECIFICATIONS
MOTOR POWER
MOTOR RPM (no load)
GRINDING WHEEL SIZE
GRINDING WHEEL GRIT
TOOL RESTS
1/2HP, 120v, 3a, 60Hz, 1Ph
1750 RPM
8” Dia x 1” Wide, 5/8” Bore
60 Grit and 120 Grit
Left and Right
EYE SHIELDS Clear Plastic, Left and Right
SPARKS ARRESTORS Left and Right
ON/OFF SWITCH Toggle with Safety Lock
MOTOR ARBOR 5/8”
WEIGHT GW 37.5 lbs/NW 34.2 lbs
POWER CORD 6 Feet
GRINDER BASE
(L x W)
7-5/8” x 5-1/2”
OVERALL SIZE
(L x W x H)
16-3/8” x 10-3/4” x 11-1/4”