Rhino Shelter Dog Kennel 7.5W X 7.5L X 4H - Manual (Page 5)

3. Always wear heavy duty work gloves when working with the Chain Roll (2). Unroll the Chain
Roll (2) around the Shelter. As you go, secure the Chain Roll (2) to the top section of the
frame with Tie Wires (7) about every 5 feet. Insert the Tie Wire (7) through the Chain Roll (2)
and wrap it around the top Frame Rail. Using pliers, twist the Tie Wire (7) until the Chain Roll
(2) is tightly in place. Repeat every 5 feet.
4. Once you have wrapped and stretched the Shelter with the Chain Roll (2) you may need
to remove extra lengths of chain before securing the end of the Chain Roll (2) in place.
Decide where to remove the final length of chain. Grab hold of one wire and twist it unhook
and then to remove it from the Chain Roll (2). Remove the wire ties at the top and bottom of
the section of Chain Roll that you are removing. Insert the Tension Bar (5) into the Chain
Roll links of the Roll Chain (2).
5.
Secure the Chain Roll (2) by attaching a Tie Wire (7) at the top of every third chain link and
securing it to the top frame. Repeat the same for the bottom of the Chain Roll (2).
6.
Once you have completed assembling the Shelter, make certain that all of the Upright
Pipes (6), Corner Frame Rails (3) and Straight Frame Rails (4) are lined up and square.
Make certain that the Chain Roll (2) is secured in place. Make certain that all hardware is
secure and in place. Make sure that there are no exposed sharp edged component parts
before using the Shelter.
DK75754JJ/DK751306JJ Please DO NOT return unit to store or dealer. For all questions or shortages please contact Page 5
Customer Service at: 800-447-7079 or 203-877-7070