Operation, Troubleshooting, Limited warranty – Nature Power BAYPORT Solar Post Lamp (23106) User Manual
Page 4
Page 4
OPERATION
The solar light must be left to charge for a minimum of 2 sunny days in the OFF position upon purchase
before best results are achieved.
1)
For daily/normal operation, adjust the switch to the “LOW” or “HIGH” position. “LOW” is for dimmer
light and longer runtime, whereas “HIGH” is for brighter light and shorter runtime. Light will
automatically turn on when the sun goes down.
2)
The performance of the solar light will vary with the time of year. It will deliver light for longer times
when it has had a full day in the sun rather than a day in overcast weather and likewise the light will
run for longer times in summer than in winter.
3)
The solar light must be left to charge for a minimum of 2 full sunny days upon purchase before best
results are achieved. Please locate your Solar Light in a position where it can absorb direct sunlight
on the Solar Panel, and generally free from cover and shade.
TROUBLESHOOTING
If your solar light does not turn ON at dusk despite observance of all the instructions, please try the
following steps:
1)
Make sure the solar light is not being affected by any other light source; if this is the case move your solar light to a
location where there is less light interference.
2)
Make sure the solar light is not located in any shade during the day.
3)
Make sure the switch is either in the “HIGH” or “LOW” position.
4)
If your solar light turns on during the day, usually the sensor needs to be reset. To do this, turn the light into the OFF
position and take it into a dark room. Switch to the ON position and once the light comes on, the sensor has been reset.
LIMITED WARRANTY
Nature Power warrants our products to the original purchaser that this product is free from defects in materials and
workmanship for the period of one year from date of purchase. In the case of product defect, contact Nature Power customer
service to receive troubleshooting. If defective part or unit should be returned, a Return Authorization Number must be issued
by Nature Power and the defective part or unit should be returned to the authorized location at the purchasers’ expense. A
dated proof of purchase is required to receive warranty service. Once received at authorized location and defect proves to be
the result of defective material and workmanship, the defective part or unit will be replaced at warrantors’ option and returned
to the original purchaser at warrantors’ expense. No refunds will be granted by the warrantor, in the event of buyer’s remorse
please contact your point of purchase within and in adherence to their return policy. Refunds are granted at the retailers’
discretions. Dated Proof of Purchase is required.
Please contact Nature Power Products to acquire more information or technical support:
1-‐800-‐588-‐0590
www.naturepowerproducts.com