LumaSense Technologies Pearl OEM Manual - Manual (Page 15)

Pearl User Manual Connections 15
3 Connections
The Pearl models have different connections for providing power, RS232 communications, and
either digital or composite video images. In all cases, the cameras required a connection for the
9 to 24 Volt DC input power.
Composite Video output is available through a BNC connector or the 4-plug connector. The
RS232 Interface is through the 3-plug connector. The following sections describe the connectors
in detail.
Refer to the diagrams below for the required connections, depending on the camera
configuration used.
Standard Camera and Core Configurations
Diagram for the camera connections using a host computer controller
3.1 Pearl OEM Camera
The back panel of the Pearl OEM Camera has connectors for power, video, and the RS232
interface. A RS232 signal level converter provides RS232 standard signal levels, which is well
suited for production applications that require RS232 signal levels to interface directly to a host
computer.
Back panel of the OEM camera showing connectors available.
Power &
Optional Video
Connection
RS232
Connection
Video
Connection