LT Security LTD411M6KIT - Manual (Page 9)

User Manual
5.5 Record Frame Rate
The total frame rate is 50fps (PAL) or
1 3FPS 2 5FPS
RECORD FRAMERATE
TOTAL 36FPS
3 25FPS 4 3FPS
( )MOVE (SEL) + (
■
)- (MENU)EXIT
60fps (NTSC). You can set the frame rate
for the channel which you selecte to record.
If the sum of the frame rate you select for
all cameras is more
than 50fps (PAL)/60fps
(NTSC), the DVR will automatically adjust
the largest frame rate value to a smaller
value.
Press [▲, ▼, ◄◄ or ►►] button to select a channel, and then press [SEL] to
increase the value or press [
■
STOP] to reduce the value.
Note: Higher frame rate shows smooth images, but requires more hard drive
space.
5.6 Video Quality
8
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY NORMAL
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
Video Quality has 4 different settings:
Highest, High, Normal and Low.
5.7 Record Schedule
Setting the Record Schedule allows you to customize the type of recording
depending on the time of day.
The higher the video quality, the better
quality of images, however higher quality
images require more hard drive space.
Press
[ SEL ]
to change the quality setting.
The time line indicates 24 hours of a
day based on AM/PM (0 = 12).
RDCORD SCHEDULE
AM PM
0… 3… 6… 9… 0… 3…. 6… 9…
NO-RECORD
NORMAL-RECORD
SENSOR-RECORD
( )MOVE (SEL)SELECT (MENU)EXIT
S
Press [▲, ▼, ◄◄ or ►►] button
to select a time point, press [SEL] to
modify the recording mode.