Lincoln Electric IM858 RED-D-ARC ZR-8 - Manual (Page 23)

C-2 ACCESSORIES C-2
ZR-8
K844-1 Water Valve Kit - For use with water cooled TIG torch,
Installs inside of TIG Module.
K939-1 Docking Kit - For Mounting the K930-2 TIG Module on
top of the ZR-8.
RECOMMENDED EQUIPMENT
STICK
K704(400Amp) or K875(150Amp) Accessory Kits
which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
WIRE FEED
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid.
K1870-1 LN-15 Across The Arc - Portable, lightweight,
compact CC/CV unit for flux-cored and MIG welding.
Includes gas solenoid, adjustable flow meter and
internal contactor. For 10-15 ib. (4.5- 6.8kg) spools.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum 350 Innershield Gun (for LN-
25, LN-15).
K1802-1 Magnum 300MIG Gun (for LN-25,
includes Connector Kit).
K470-2 Magnum 300 MIG Gun (for LN-15,
requires K466-10 Magnum Gun
Connector Kit).
K1500-1 Gun Receiver Bushing (for LN-15,
K126-2).
Note: See Wire Feeder IM Manual for appropriate
Drive Roll & Guide Tube Kits.
TIG WELDING
K1783-9 PTA-26V TIG Torch
KP509 Magnum Parts Kit and Argon gas.
K930-2 TIG Module
Required TIG Equipment:
K938-1 Contactor Kit
K936-4 Control Cable
K814 Arc Start Switch
Optional TIG Equipment:
K939-1 Docking Kit
K937-45 Control Cable
Extension
K844-1 Water Valve Kit
PLASM CUTTING
K1580-1 Pro-Cut 55 (Requires full KVA
Adapter K1816-1