Lincoln Electric IM608 X-TRACTOR 4G - Manual (Page 14)

D-1 TROUBLESHOOTING D-1
X-TRACTOR 4G
Observe all Safety Guidelines detailed througout this manual
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
CAUTION
PROBLEMS
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
RECOMMENDED
COURSE OF ACTION
Poor Suction
Motor not Running
Abnormal noise
Suction device is too far
away from arc
Leakage
Filter not being cleaned
Improper application
Filter blocked
Motor overload tripped
Voltage out of range
Damaged bearings
Belts slipping
Position suction head closer to arc
Optimum capture distance is
generally less than 4 inches.
Check: Hose connections, Hose integrity,
Air path inside the machine.
Check: Compressed air supply
Cleaning frequency timer
Solenoid valves
Check: Number of operators(less than four)
Hose dia. & length.(1 3 /
4
” dia. up
to 50’ long)
Replace filter
Check: proper input voltage on all phases,
proper overload setting
Reset circuit breaker or replace fuse if
necessary
Check: input voltage
Replace bearings or blower
Tighten belts