Lincoln Electric IM546 WELD-PAK 100 PLUS - Manual (Page 39)

D-5 MAINTENANCE
WELD-PAK 100
GUN HANDLE PARTS
The gun handle consists of two halves that
are held together with a collar on each end.
To open up the handle, turn the collars
approximately 60 degrees counter-clock-
wise until the collar reaches a stop. Then
pull the collar off the gun handle. If the col-
lars are difficult to turn, position the gun
handle against a corner, place a screwdriv-
er against the tab on the collar and give the
screwdriver a sharp blow to turn the collar
past an internal locking rib. See Figure D-3.
FIGURE D.3
➣
Counter-clockwise