Lincoln Electric IM564 SP-100T - Manual (Page 32)

C-1 ACCESSORIES C-1
OPTIONAL ACCESSORIES
1. K549-1 .035" (0.9 mm) Innershield ® Welding Kit
— Includes a contact tip, a gasless nozzle and a
.035/.045" (.9/1.2 mm) cable liner to permit the
Magnum™ 100L gun and cable to use .035" (0.9
mm) diameter flux-cored electrode. The fitting on
the end of the liner is stenciled with the maximum
rated wire size (.045"/1.2 mm). Also included is a
10 lb. (4.5 kg.) spool of .035" (0.9 mm) Innershield
NR-211-MP.
See “Innershield (FCAW) Conversion” in this sec-
tion for installation instructions and MAINTE-
NANCE section for proper feeding component con-
figuration and installation.
2. K664-2 Aluminum Feeding Kit — This kit
required for welding with .035 Aluminum wire. This
kit may also be used for feeding .035 stainless
wire. Included with this kit are a drive roll, liner and
contact tip.
It is important when changing
between welding with steel wire and aluminum
to exchange these components due to the
lubricant applied to steel wire. Failure to do so
may result in contaminated welds when weld-
ing aluminum.
3. KP665-045C Drive Roll – Optional — Knurled
drive roll for feeding .035 (0.9 mm) diameter flux-
cored electrode.
4. K520 Utility Cart — Designed to transport the
Lincoln family of small welders. Has provisions for
mounting a single gas cylinder. Has front casters
and large rear wheels. Handle height is easily
adjustable. Bottom tray provided for tools and
accessories. Easy assembly required; takes less
than 15 minutes.
5. K1800-1 CO2 Adjustable Regulator and Hose Kit —
Includes an adjustable pressure flow regulator for
use on CO2 cylinders.
Weld shielding gas may be obtained from a weld-
ing supply distributor.
Also included is a gas hose which connects to the
rear of the welder.
See “Gas Connection” in Installation section for
installation instructions.
6. K1799-1 Argon-Mixed Gas Adjustable Regulator
and Hose Kit (1)
Includes an adjustable pressure and flow regulator
for use on argon-mixed gas cylinders. Also includ-
ed is a gas hose which connects to the rear of the
welder.
7 . K586-1 Deluxe Adjustable Gas Regulator &
Hose Kit
Accommodates CO2 or mixed Gas Cylinders.
8. K697-1 Power Cord Extension — Extension 115V
power cord (20’/6.1m) allows extra convenience
when work is located some distance away from
power receptacle.
(1) This regulator comes standard with a 4.5 foot hose
with the SP-100T.
SP-100T