Lincoln Electric IM684 RED-D-ARC ZR-10 - Manual (Page 19)

B-6 OPERATION B-6
ZR-10
Load From
115V/230V
Dual Voltage Each Half of
Total From
Receptacle Each 115V Both 115V
Duplex Duplexes
0 15 40*
2.2 KW 15 40*
4.5 KW 15 40*
6.7 KW 15 20*
9.0 KW 0 0
TABLE II Maximum Current Draw from 115V GFCI
Duplex Receptacles - No Welding
*Maximum current draw from each 115V
GFCI Duplex is 20 amps
TABLE lll
ELECTRICAL DEVICES USE WITH THE ZR-10
Type Common Electrical Devices Possible Concerns
Resistive Heaters, toasters, incandescent NONE
light bulbs, electric range, hot
pan, skillet, coffee maker.
Capacitive TV sets, radios, microwaves, Voltage spikes or high voltage
appliances with electrical control. regulation can cause the capac-
itative elements to fail. Surge
protection, transient protection,
and additional loading is recom-
mended for 100% fail-safe
operation. DO NOT RUN
THESE DEVICES WITHOUT
ADDITIONAL RESISTIVE TYPE
LOADS.
Inductive Single-phase induction motors, These devices require large
drills, well pumps, grinders, small current inrush for starting.
refrigerators, weed and hedge Some synchronous motors may
trimmers be frequency sensitive to attain
maximum output torque, but
they SHOULD BE SAFE from
any frequency induced failures.
Capacitive/Inductive Computers, high resolution TV sets, An inductive type line condition-
complicated electrical equipment. er along with transient and
surge protection is required,
and liabilities still exist. DO
NOT USE THESE DEVICES
WITH A ZR-10.
The Lincoln Electric Company is not responsible for any damage to electrical components improperly connect-
ed to the ZR-10
Load From
115V/230V
Dual Voltage Each Half of
Total From
Receptacle Each 115V Both 115V
Duplex Duplexes
0 15* 60
2.2 KW 15* 60
4.5 KW 15* 40
6.7 KW 15* 20
9.0 KW 0 0
TABLE I Maximum Current Draw from 115V Duplex Receptacles - No Welding
*NEMA 5-15P Plug required for 15Amp Draw