Lincoln Electric IM837 RANGER 305 D (CE) - Manual (Page 19)

A-7 INSTALLATION
RANGER 305D (CE)
A-7
Connection of LN-742 and Cobramatic to RANGER
305D (CE)
• Shut the welder off.
• Connect per instructions on the appropriate connec-
tion diagram in Section F.
Connection of PRINCE XL SPOOL GUN to the
RANGER 305D (CE)
Connection of the Prince XL Spool Gun requires the
use of the K1849-1 Adapter Module.
• Shut the Welder off.
• For electrode Positive, connect the electrode cable
to the "+" terminal of the welder and work cable to
the "-" terminal of the welder. For electrode
Negative, connect the electrode cable "-" terminal of
the welder and work cable to the "+" terminal of the
welder.
• Connect the Control Cable of the Spool Gun to the
Adapter Module and connect the Control Cable of
the Adapter Module to the Welder.
• Connect the Gas Hose.
• Set the MODE switch to the "CV-WIRE " position.
• Set the "WELD TERMINALS" switch to "WELD
TERMINALS ON".
• Set the "ARC CONTROL" knob to "0" initially and
adjust to suit.
• Set the “IDLE” switch to the “HIGH” position.