Lincoln Electric IM929 RANGER 3 PHASE - Manual (Page 23)

C-2 ACCESSORIES C-2
RANGER 3 PHASE
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
WIRE FEED
LN-25
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides
“ cold ”
electrode until gun trigger is pressed. Includes gas
solenoid. Requires Drive Roll Kit and Weld Power
Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
LN-15
K449 LN-15 - Includes internal contactor for across
the arc operation (no control cable). Provides
“ cold ”
electrode until gun trigger is pressed. Includes gas
solenoid. Requires Drive Roll Kit and Weld Power
Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Magnum
Innershield Gun and wire bushing is required for gas-
less welding.
TIG
PRO TORCH
®
TIG Torch
K1783-9 PTA 26V TIG Torch
Magnum Parts Kit and Argon Gas
• KP509 Parts Kit
K930-2 TIG Module (Requires)
• Requires K938-1 Contactor Kit,
• K936-4 Control Cable, and
• K814 Arc Start Switch
Optional TIG Module Accessory:
• K939-1 Docking Kit
• K937-45 Control Cable Extensions (45ft.)