Lincoln Electric IM541 MAGNUM 450WC Fast-Mate Water-Cooled Gun and Cable - Manual (Page 8)

MAGNUM 450 WC
A-1 GENERAL DESCRIPTION A-1
Description
Gun Gas
Product Cable Wire Size Contact Tips Diffuser Gas Cable Gun Tube
Number Length (m) in. (mm) Assembly Nozzle Liner Angle
K684-1 10 ft. .035 (0.9) S22334-035
(3.0) .045 (1.2) S22334-045 S22030-1 M18210-4 M16083-1 60°
K684-2 15 ft. .035 (0.9) S22334-035
(4.5) .045 (1.2) S22334-045 S22030-1 M18210-4 M16083-1 60°
K684-3 10 ft. .052 (1.3) S22334-052
(3.0) 1/16 (1.6) S22334-116 S22030-1 M18210-4 M16083-2 60°
K684-4 15 ft. .052 (1.3) S22334-052
(4.5) 1/16 (1.6) S22334-116 S22030-1 M18210-4 M16083-2 60°
K684-5 10 ft. 1/16 (1.6) S22334-116 S22030-1 M18210-4 M16083-3 60°
(3.5) 5/64 (2.0) S22334-564
K684-6 15 ft. 1/16 (1.6) S22334-116 S22030-1 M18210-4 M16083-3 60°
(4.5) 5/64 (2.0) S22334-564
K684-7 10 ft. .035A (0.9A) S22334-035A S22030-1 M18210-4 M18732-5 45°
(3.5) 3/64A (1.2A) S22334-045A
K684-8 10 ft. 1/16A (1.6) S22334-116A S22030-1 M18210-4 M18732-3 45°
(3.5)
TABLE A.1 – MAGNUM™ 450WC AT 100% DUTY CYCLE WITH CO2 GAS*
GENERAL DESCRIPTION
The Magnum™ 450WC Water Cooled Gun is rated at 450 amperes 100% duty cycle using carbon dioxide shield-
ing gas and cooled with water at a flow rate of .58 gallons per minute (2.2 liters per minute). It is also rated 400
amperes 100% duty cycle with mixed argon shielding gases. There are several models of guns designed for gas
metal arc welding (GMAW) with .035-1/16 (.9mm-1.6mm) solid electrodes and flux cored arc welding (FCAW)
with .045-5/64 (1.2 mm-2.0mm) cored electrodes. The gun tube angle is as shown in the table below and the gun
has a Fast-Mate™ wire feeder end connector. Two 10 ft. (3.5 M) guns with a 45 degree gun tube angle are avail-
able for feeding .035-1/16 (.9mm-1.6mm) aluminum electrode. Optional liners are available for feeding aluminum
electrode with the 60 degree guns. See ACESSORIES section for details.
* May also be used with mixed argon shielding gases at 400 ampers 100% Duty Cycle.